FUEL COMPONENTS
-
Fuel Pump Voltage Booster for 2010 Camaro SS
Designed to increase fuel pump performance. Reduces fuel pressure drop during high demand conditions.
-
Super Fuel Management Unit
Vortech's Super Fuel Management Unit (Super FMU) is a tuner's dream. It permits complete tailoring of the fuel pressure curve relative to manifold pressure, including upper and lower limits. The Super FMU can be used in a series or as a stand alone component.
-
Fuel Management Unit
The Vortech Standard Fuel Management Unit (FMU) is designed for use on multi-point electronic fuel injected engines. It is a secondary fuel regulator that installs in series with a stock regulator on the return line to the tank. The unit increases fuel pressure in proportion to boost pressure (this assumes the pump being utilized is of sufficient pressure and flow to deliver the fuel required).
-
Fuel Pumps
Vortech fuel pumps are designed for various applications. To select the pump that best suits your needs, you must first determine the flow requirements and at what pressure this demand must be met.
-
Fuel Pump Accessories
Pump accessories include in-tank fuel pickup, Y-blocks, banjo fittings, hose barbs and barb reducers.
-
Fuel Pressure Optimizer
Vortech billet aluminum Maxflow fuel pressure optimizer attaches to the factory fuel pressure regulator and permits adjustment from 25 to 70 PSIG. It allows the user to properly tune the air-to-fuel ratio on stock or modified engines.
-
EFI Fuel Pressure Regulators
Vortech fuel pressure regulators feature an adjustment range of approximately 25-80 PSIG. Each unit is manufactured using 6061 T-6 billet aluminum and has a blue anodized finish. A vacuum/pressure port allows for a 1:1 gain when used in boosted applications.
-
Fuel Rails
Designed to meet the needs of both street and racing EFI engines, Vortech's 1/2" I.D. high-flow fuel rails provide the correct flow rate to the injectors. Extruded from aircraft quality aluminum, then CNC machined, each rail is anodized for appearance and improved corrosion resistance. Included are AN fittings, O-rings and all necessary mounting hardware.
-
High-Flow Fuel Filters
Our machined fuel filters are made from 6061 T-6 billet aluminum and feature a blue anodized finish. They are designed to meet the flow demands of 1500+horsepower racing engines. Filters are available with a standard paper element or a lifetime, washable 35 micron stainless steel element. Both contain all necessary mounting hardware and are machined for -10 AN fittings. -AN reducers can be used for -8 to -4 systems.
-
Fuel Injectors
A consistent fuel supply results in maximum power for optimum performance. Vortech high-impedence fuel injectors ensure balanced fuel delivery to each cylinder.
